303-443-9271 • Mon-Fri 8:00-5:00 • Will Call Pickup: 500 S Arthur Ave, Ste 600, Louisville, CO
Multiwall Polycarbonate Two-Part Snap-H Connector
Polycarbonate
- Description
- Features
- Reviews
A base rail and a snap-on cap that joins two panels without either panel being slid in from the end. Sized for 6-16mm multiwall panel. Snap-fit.
Lay the base, drop both panels on, snap the cap down. A damaged panel can be swapped later without dismantling the whole run.
In a polycarbonate glazing system the profiles exist so the panel can move. That is why they are dry-fit, why the screw goes through the panel in an oversized hole rather than into the profile, and why adhesive, putty and unapproved sealants void the panel warranty.
- A base rail and a snap-on cap that joins two panels without either pan
- Sized for 6-16mm multiwall panel
- Snap-fit
- Bronze finish
- Sold by the foot
- Dry-fit - no adhesive or putty at the joint
- Screw through the panel, not into the profile
- Oversized holes so the panel can move
| Material | PC |
|---|---|
| Unit of Measure | Ft |
